Page 8 - GECITECH

CONVOLUTED PTFE HOSE WITH STAINLESS STEEL BRAID
PTFE convoluted hose. Outer surface reinforced by a 304L stainless steel braid.
PRODUCT HIGHLIGHTS
lIdeal for the transfer of aggressive products in dynamic application.
nAvailable from ND 6 to 50 mm (0.25 to 2 inches). (For higher ND, consult us).
nWorking pressure from 23 to 172 bar (334 to 2495 PSI). nWorking temperature range from -70 to +260°C (-94 to +500°F). nFor vacuum applications, contact us.
Assembly options (See page 13)
CE 10/2011
The 316L stainless steel swaged fittings are monoblocs (no welds) in accordance with the NRS® design (Non Retention System). Many types of fittings are also available upon request (SMS, DIN, CLAMP, RJT, ISS, FIL, GAS, NPT, JIC, FLANGES, etc.).
Smoothbore carbon-filled PTFE. Outer surface reinforced by a 304L stainless steel braid.
nAvailable from ND 5 to 25 mm (0.2 to 1 inch).
nWorking pressure from 80 to 264 bar (1160 to 3829 PSI). nWorking temperature range from -70 to +260°C (-94 to +500°F).
SMOOTHBORE CARBON-FILLED PTFE HOSE WITH STAINLESS STEEL BRAID
PRODUCT HIGHLIGHTS
lIdeal for the transfer of chemical products, solvents and steam both at high temperature and pressure in explosive areas.
lThe non-stick quality of the PTFE allows good flow of the conveyed liquids with minimum pressure loss.
NRS
Atex validated by INERIS in accordance with the certification n°87830-1/07 (Assembly by GECITECH).
Assembly options (See page 13)
CONVOLUTED CARBON-FILLED PTFE HOSE
PRODUCT HIGHLIGHTS
lFor applications requiring an ex- cellent temperature consistency. lHose with high flexibility and
resistance to solvents and other che- mical agents even in explosive areas.
6
The 316L stainless steel swaged fittings are monoblocs (no welds) in accordance with the NRS® design (Non Retention System). Many types of fittings are also available upon request (SMS, DIN, CLAMP, RJT, ISS, FIL, GAS, NPT, JIC, FLANGES, etc.).
Convoluted carbon-filled PTFE. Outer surface reinforced by a 304L stainless- steel braid.
nAvailable from ND 6 to 50 mm (0.25 to 2 inches).
nWorking pressure from 23 to 172 bar (334 to 2495 PSI). nWorking temperature range from -70 to +260°C (-94 to +500°F). nFor vacuum applications, contact us.
Atex validated by INERIS in accordance with the certification n°87830-1/07 (Assembly by GECITECH).
Assembly options (See page 13)
The 316L stainless steel swaged fittings are monoblocs (no welds) in accordance with the NRS® design (Non Retention System). Many types of fittings are also available upon request (SMS, DIN, CLAMP, RJT, ISS, FIL, GAS, NPT, JIC, FLANGES, etc.).
THERMOPLASTIC HOSES