Page 6 - GECITECH

POLYTECH® PFA / EPDM
NRS
White smooth PFA bore with textile ply and galvanized steel wires embedded in the wall. Outer surface is blue EPDM (other colours available upon request).
PRODUCT HIGHLIGHTS
lHighly resistant hose for the trans- and chemical products. fer of food, pharmaceutical, cosmetic
nAvailable from ND 13 to 100 mm (0.51 to 4 inches).
nWorking pressure 10 bar (145 PSI).
nWorking temperature range from -30 to +130°C* (-22 to +266°F).
Assembly options (See page 13)
CE 10/2011
BNIC
(French Inter-trade COGNAC Office)
The 316L stainless steel swaged fittings are monoblocs (no welds) in accordance with the NRS® design (Non Retention System). The hose can be also supplied with reusable fittings and ferrules. Many types of fittings are also available upon request (SMS, DIN, CLAMP, RJT, ISS, FIL, GAS, NPT, JIC, FLANGES, etc.).
White PFA, ultra smooth and non-adherent, textile ply and galvanized steel wires embedded in the wall. Blue/black marbled finish and antistatic.
POLYTECH® CP (Carbone Pharma) PFA / EPDM
PRODUCT HIGHLIGHTS
lRobust hose for the transfer of food, using bipolar solvents in explosive areas. pharmaceutical and chemical products
nAvailable from ND 13 to 100 mm (0.51 to 4 inches).
nWorking pressure 10 bar (145 PSI).
nWorking temperature range from -30 to +130°C * (-22 to +266°F). nStandard manufacturing length 20 m (66 feet).
Assembly options (See page 13)
CE 10/2011
Atex validated by INERIS in accordance with the certification N° 21795.2X/09 (Assembly by GECITECH).
The 316L stainless steel swaged fittings are monoblocs (no welds) in accordance with the NRS® design (Non Retention System). Many types of fittings are also available upon request (SMS, DIN, CLAMP, RJT, ISS, FIL, GAS, NPT, JIC, FLANGES, etc.).
Black PFA smooth antistatic with textile ply and galvanized steel wires embedded in the wall. Blue/black marbled finish and antistatic.
nAvailable from ND 13 to 100 mm (0.51 to 4 inches).
nWorking pressure 10 bar (145 PSI).
nWorking temperature range from -30 to +130°C* (-22 to +266°F). nStandard manufacturing length 20 m (66 feet).
Atex validated by INERIS in accordance with Assembly options (See page 13) the certification N° 21795.2X/09 (Assembly by GECITECH). The 316L stainless steel swaged fittings are monoblocs (no welds) in accordance with the NRS® design (Non Retention System). Many types of fittings are also available upon request (SMS, DIN, CLAMP, RJT, ISS,
FIL, GAS, NPT, JIC, FLANGES, etc.).
NRS
POLYTECH® CC (Carbone Chimie) PFA / EPDM
NRS
PRODUCT HIGHLIGHTS
lRobust hose for the transfer of all pro- ducts including the most aggressive fluids
in explosive areas.
4
* For temperature requirements above 100°C (212°F), please contact us.
THERMOPLASTIC HOSES