Page 7 - GECITECH

FLEXAL® UPE / ELASTOMER
UPE translucent film inside, textile reinforcement and galvanized steel wires embedded in the wall. Outer surface red or blue NR canvas printing.
PRODUCT HIGHLIGHTS
lVery flexible hose specially designed for the transfer of food liquids (fruit juices, beer, wine...).
l Ideal for distilled products with a high
alcohol level (up to 99%).
lTDG authorization (Transportation of Dangerous Goods).
nAvailable from ND 25 to 76 mm (1 to 3 inches).
nWorking temperature range from -30°C to +85°C (-22 to 185°F). nStandard manufacturing length 40m (131 feet).
nWorking pressure 10 bar (145 PSI).
Assembly options (See page 13)
BNIC
(French Inter-trade COGNAC Office)
CE 10/2011
NRS
Reusable ferrules
Equipped with 316L stainless steel swaged fittings (no welds) in accordance with the NRSTM design (Non Retention System). Many types of fittings are also available upon request (SMS, DIN, CLAMP, RJT, ISS, FIL, GAS, NPT, JIC, FLANGES, etc.).
VIEWLINE®
MFA
Fluorinated thermoplastic, translucent to view the product transfer.
nAvailable from ND 25 to 100 mm (1 to 4 inches).
nWorking pressure from 4 to 8 bar (58 to 116 PSI).
nWorking temperature range from -40 to +150°C (-40 to 302°F).
nAvailable in longer length for diameter 20x24 for level gauge (replacement of the glass level gauge).
Assembly options (See page 13)
CE10/2011
PRODUCT HIGHLIGHTS
lMaterial shatter resistant, chemi- cally inert to avoid contamination of the
transferred product. Suitable for food, pharmaceutical, cosmetic and chemi- cal applications. It is also tasteless and odorless.
lCan be externally reinforced with a stainless steel safety guard according to the ratio pressure / temperature applica- tions.
lCan be assembled in longer length for tank level applications. (glass gauge replacement).
NRS
The 316L stainless steel swaged fittings are monoblocs (no welds) in accordance with the NRS® design (Non Retention System). Many types of fittings are also available upon request (SMS, MACON, DIN, CLAMP, RJT, ISS, FIL, GAS, NPT, JIC, FLANGES, etc.).
Smooth PTFE bore hose. Outer surface reinforced by a 304L stainless steel braid.
SMOOTHBORE PTFE HOSE WITH STAINLESS STEEL BRAID
PRODUCT HIGHLIGHT
lIdeal for the transfer of chemical pro- lNon-adherent characteristic allows ducts, steam circuit even at high tempe- a good flow of the transfer fluid with rature and pressure. minimum pressure loss.
nAvailable from ND 5 to 25 mm (0.2 to 1 inch).
nWorking pressure from 20 to 264 bar (290 to 3829 PSI). nWorking temperature range from -70 to +260°C (-94 to +500°F). nNo vacuum capability.
Assembly options (See page 13)
CE 10/2011
NRS
The 316L stainless steel swaged fittings are monoblocs (no welds) in accordance with the NRS® design (Non Retention System). Many types of fittings are also available upon request (SMS, DIN, CLAMP, RJT, ISS, FIL, GAS, NPT, JIC, FLANGES, etc.).
5
THERMOPLASTIC HOSES