Page 12 - GECITECH

OUTER PROTECTIONS
PRODUCT HIGHLIGHTS
lEasy cleaning of the outer surface of lSurface thermal protection.
the hose. lFinish with stainless-steel over-rings
lVisualization of possible leaks. lProtection against dirt in the metal braids.
at both ends.
PRODUCT HIGHLIGHTS
lThermal protection of the hose, limits lLimits the heat loss of the conveyed thermal shocks between inside and outside. product.
STAINLESS-STEEL CORRUGATED FLEXIBLE HOSE
PTFE HOSE VERY HIGH PRESSURE
PRODUCT HIGHLIGHTS
lIdeal for the transfer of liquid or lVery high resistance against me- gas. chanical stress (5 times higher than lFrom 5,000 to 10,000 cycles. the EN ISO 10380 norm).
lHigh security in hard conditions.
lHigh sealing.
PRODUCT HIGHLIGHTS
lPerfect solution for the trans- fer of chemical products, solvents, steam both at high temperature and pressure.
lTransfer of food products, in ac- cordance with the regulation FDA 21 CFR 177 1550.
lNon-adherent PTFE allowing a good flow of the conveyed liquids, with a minimum pressure loss. lCan be used in explosive areas without restriction. INERIS validation n° 87830-1/07.
10
NRS
Silicone sleeve: Extruded silicone sleeve translucent or white (other colors upon request).
Insulating hose: Insulating sleeve made of extruded elastomer foam.
nWorking temperature range from -50 to +150°C (-58 to +302°F).
304L stainless steel braid with 316L stainless steel inner wall (mechanical forming or hydroforming).
nAvailable from ND 6 to 150 mm.
nWorking temperature from -273° to +600°C (-459°F to 1112°F).
n 3 corrugated hoses ranges, from mechanical forming to extra-flexible hydroforming.
Assembly options (See page 13)
Equipped with 316L stainless steel fittings. Many styles of fittings available (GAZ, DIN2353, NPT, flanges, etc.).
Very high-pressure hose made with PTFE antistatic resin and reinforced by a 304L stainless steel braid, high tenacity.
nAvailable from ND 6 to 25 mm (0.23 to 1 inches).
nWorking pressure 350 bar (5076 PSI).
nWorking temperature range from -70° à +260°C (-56° to +126°F).
CE 10/2011
Atex validated by INERIS in accordance with Assembly options (See page 13) the certification n°87830-1/07 (Assembly by GECITECH).
Can be equipped with 316L stainless steel fittings. Many styles of fittings available: GAZ, NPT, DIN2353, etc.
OTHER APPLICATIONS